…pallet shed pics cont’d.

Lifting a truss.

Setting a truss.

Fir strip for setting trusses and for nailers for the metal roofing.

Shell is done.

Leftover metal roof from my house a few years ago.

 

Pallet Barn update…almost finished!

I had my brother and his kids up for hunting after Thanksgiving. I made use of their time, and also invited my other two brothers and my dad to help. It was a great time working together. Three generations of Schwarz men working together to raise a barn…it was awesome.

Adding the second layer of pallets.

Everyone had an important part in the whole process. I had lots of minds to bounce ideas off of. The younger men (my nephews) were very useful in doing the things that just needed extra hands to be done, holding this or that, bringing lumber where it needed to be, nailing, screwing etc… One of my brothers was helpful in being a “go-getter” when we needed material I hadn’t gotten already and also as an extra set of hands.

Adding interior support and exterior sheathing.

Another brother did some other jobs I wasn’t able to get done with all the busyness, and he helped build the trusses. And the other brother was able to be a sort of  “job foreman”, directing the younger kids what to do, and being able to jump on jobs without much instruction. My Dad was helpful in thinking of different ways to design and build the trusses and where to add extra support of the entire structure.

Taking a break for some laughter and planning.

I thought I would be completely stressed out trying to direct everyone, but it went rather smoothly. Everything seemed to work out. Any hiccups were quickly figured out and never really became a problem. I didn’t get as much done in that day as I had hoped due to some early morning errands that took too long but all in all a lot got accomplished. A big thank you to my family!

Both layers on. Top plate installed. Sheathing and Trusses ready to be installed.

Designing the trusses.

Building the trusses.Lifting trusses in place.Setting the trusses.Fir strip to set trusses and also for nailers for metal roofing.Almost finished the trusses.

Leftover metal roof from my house used.

 

Pallet Barn Update

Old shed in background

I think its time to update you all on how the pallet barn/shed is coming along. This past summer I was able to commit myself to emptying out the existing shed and tearing it down before it fell in on everything, or on someone. It was completely rotting away due to a hole in the roof and the wet area it was set on. I had my friend come over to help tear it down to the base. I hauled away the material

Shed is down.

because none of it was worthy of recycling in this project. I am going to make use of other material that are recycled.  The run to the dump was probably the heaviest I have ever taken. I believe it was well over 1,000lbs!

So after doing that, I began to measure out and level the area where I was going to build the new barn. The back corner will be at the same spot as the former shed, making use of the same level base.

Ready to haul to the dump!

Then it will extend out in towards the hill and driveway. It will be a 16’X20′ barn.  My friend let me borrow his Kubota with a bucket on it to level out an area and spread out some soil/fill that I had piled up over the summer. I then built plywood forms and staked them to be level. Then I had 8 tons ($12.70/ton) of 2B gravel poured inside the forms. Uphill from the base, I used leftover drain pipe and covered that with gravel so any water running down the hill will drain out around the barn pad…well most of it hopefully!

Leveled ground and built form.

I am in the midst of leveling out the gravel inside the forms. I am also collecting old cinder block from a friends old barn that was knocked down. It will need a little cleaning up, but they will work great. I am going to lay the cinder block around the perimeter of the form and build the pallets on them to keep them away from any moisture. This also gives me more headroom inside the barn.

More pics to come in next update…

8 tons of 2B stone.

Ready to build!